ESD & High Voltage Matting

<p>ESD matting protects workers and equipment from the harmful effects of electrostatic discharge that can be a problem in some workplaces that deal with electronic devices such as phones, circuit boards and microchips. Industry tested and available with accessories to enhance performance, our range of ESD matting allows your workforce to perform stress free.</p><p>High Voltage matting is specifically designed for use in front of switchboards and high voltage equipment to protect workers from electric shocks. Tested to industry standards to ensure a high degree of safety, it can also provide slip resistance and comfort for extra protection against accidents.</p>

COBAswitch - Black - 6mm - 10m Rolls

SKU: CPP21000764

COBAswitch mats made of a natural rubber base polymer providing protection against electric shocks with ribbed pattern surface for slip resistance. Specifically designed switchboard matting for use in front of high voltage equipment.

  • Choose from 2 sizes
  • Length: 10,000mm
  • Width: 900mm or 1200mm
  • Thickness: 6mm
  • Colour: Black
  • Tested to 11,000 volts for 450 volt rated working

Unit of Measure: Each
Price: £211.16
COBAswitch - Black - 9.5mm - 10m Rolls

SKU: CPP21000765

COBAswitch mats made of a natural rubber base polymer providing protection against electric shocks with ribbed pattern surface for slip resistance. Specifically designed switchboard matting for use in front of high voltage equipment.

  • Choose from 2 sizes
  • Length: 10,000mm
  • Width: 900mm or 1200mm
  • Thickness: 9.5mm
  • Colour: Black
  • Tested to 15,000 volts for 650 volt rated working

Unit of Measure: Each
Price: £332.35
Senso Dial Mats

SKU: CPP21000781

Senso Dial mats with deckplate patterned NBR/SBR rubber topped surface, EPDM foam backing for fatigue relief and ramped edges for safety. Hard-wearing and ESD approved mat resistant to oil spillage.

  • Choose from 2 sizes
  • Width: 1000mm
  • Length: 10,000mm or linear metre (when ordering the no. of linear meters will correspond to the quantity ordered)
  • Thickness: 10mm
  • Colour: Black

Unit of Measure: Each
Price: £121.13
COBAstat Mats

SKU: CPP21000823

COBAstat static-dissapative anti-fatigue mats made from PVC foam with pebble top surface and grounding male stud on bottom. Durable and comfortable ESD floor mat ideal for use around machinery where static build up is common.

  • Choose from 2 sizes
  • Width: 600mm or 900mm
  • Length: 900mm 1500mm, or 18,300mm
  • Thickness: 9mm
  • Colour: Grey

Unit of Measure: Each
Price: £53.08
COBAstat Floor Kits

SKU: CPP21000824

COBAstat floor kits for the complete installation of COBAstat mats. Durable and comfortable ESD floor mat with accessories to allow full personnel safety when dealing with machinery or items where static build up can be a problem.

  • Each kit contains:
    • 1 x COBAstat floor mat
    • 1 x male stud to connect to grounding wire
    • 2 metres of floor mat grounding wire
    • 2 x heel grounders
    • 1 x UK earth bonding plug to connect lead to earth
  • Choose from 2 sizes of COBAstat mat:
    • 600mm(w) x 900mm(l)
    • 900mm(w) x 1500mm(l)

Unit of Measure: Each
Price: £115.17
HR Matting Bench Kits

SKU: CPP21000825

HR matting bench kits for the complete installation of HR mats. Quality work surface mat with accessories ideal for use within the electronics industry or any environments that requires ESD proection for materials and staff

  • Each kit contains:
    • 1 x HR bench mat
    • 1 x ESD wristband
    • 1 x 1.8m coil cord
    • 1 x 4.5m common point grounding wire
    • 1 x UK earth bonding plug to connect lead to earth
  • HR mat size: 600mm(w) x 1200mm(l)
  • Colour: Blue or Grey

Unit of Measure: Each
Price: £136.79
Benchstat Matting Kits

SKU: CPP21000826

Benchstat matting kits for the complete installation of Benchstat mats. Superior work surface mat with accessories perfect for installation on workbenches in the electronics industry.

  • Each kit contains:
    • 1 x Benchstat mat
    • 1 x Male stud to connnect to common point wire
    • 1 x ESD wristband
    • 1 x 1.8m coil cord
    • 1 x 4.5m common point grounding wire
    • 1 x UK earth bonding plug to connect lead to earth
  • Benchstat mat size: 600mm(w) x 1200mm(l)
  • Colour: Grey or Blue

Unit of Measure: Each
Price: £112.44
COBAstat - Grey - 0.9m x Linear Mtre

SKU: AS060003C

COBAstat static-dissapative anti-fatigue mats made from PVC foam with pebble top surface and grounding male stud on bottom. Durable and comfortable ESD floor mat ideal for use around machinery where static build up is common.

  • Width: 900mm
  • Length: per linear metre (when ordering the no. of linear meters will correspond to the quantity ordered)
  • Thickness: 9mm
  • Colour: Grey

Unit of Measure: Each
Price: £70.04
ESD Rubber Floor Mat

SKU: ESDF010005

ESD rubber floor mat made from black rubber with smooth surface finish and grounding stud in corner. Ideal for use at electronic workstations or around circuitry.

  • Overall size: 600mm x 1200mm
  • Thickness: 3mm
  • Colour: Black

Unit of Measure: Each
Price: £38.05
ESD Rubber Bench Mat

SKU: ESDB010005

ESD rubber bench mat made from black rubber with smooth surface finish and grounding stud in corner. Ideal for use at electronic workstations or around circuitry.

  • Overall size: 600mm x 1200mm
  • Thickness: 2mm
  • Colour: Black

Unit of Measure: Each
Price: £30.41
Conductive Neoprene Bench/Floor Mat

SKU: CBF010004

Conductive neoprene bench or floor mat with grounding stud in corner and low reflection surface. Solder iron resistant mat that is ideal for use when working on circuitry or electronics.

  • Overall size: 600mm x 1200mm
  • Thickness: 2mm
  • Colour: Black
  • Conforms to IEC 61340-2-3 and IEC61340-4-1

Unit of Measure: Each
Price: £32.58
ESD Heel Grounder - Black

SKU: HR000008

ESD Heel Grounder made of hardwearing and long-lasting rubber with condictive tab to allow effective skin contact. Allows operators to work safely by providing grounding when used with suiatble conductive or dissipative flooring.

Unit of Measure: Each
Price: £11.47
Floor Mat Grounding Wire

SKU: HR000011

Floor mat grounding wire with 10mm female stud on each end for connection to mat and earth plug. Fitted with integral 1 meg Ohm resistor

  • Length: 2 metres

Unit of Measure: Each
Price: £9.70
UK Earth Bonding Plug - Yellow

SKU: HR000009

UK Earth Bonding plug designed to fit all UK standard plug outlets with plastic neutral and mains pins and metal earth pin. Ideal grounding point for ESD bench or floor mats.

Unit of Measure: Each
Price: £11.75
Conductive Rubber Bench Matting

SKU: CPP21001616

Conductive rubber bench mats with low reflective 0.5mm thick static dissipative top coloured layer and grounding stud in the corner. Solder iron resistant mats ideal for use when working on electronics or circuitry.

  • Choose from 2 colours: Grey or Green
  • Overall size: 600mm x 1200mm
  • Thickness: 1.2mm
  • Conform to IEC 61340-2-3

Unit of Measure: Each
Price: £31.62
COBAswitch - Black - 6mm - Per Linear Metre

SKU: CPP21001969

COBAswitch mats made of a natural rubber base polymer providing protection against electric shocks with ribbed pattern surface for slip resistance. Specifically designed switchboard matting for use in front of high voltage equipment.

  • Choose from 2 sizes
  • Length: per linear metre (when ordering the no. of linear meters will correspond to the quantity ordered)
  • Width: 900mm or 1200mm
  • Thickness: 6mm
  • Colour: Black
  • Tested to 11,000 volts for 450 volt rated working

Unit of Measure: Each
Price: £23.25
COBAswitch - Black - 9.5mm - Per Linear Metre

SKU: CPP21001970

COBAswitch mats made of a natural rubber base polymer providing protection against electric shocks with ribbed pattern surface for slip resistance. Specifically designed switchboard matting for use in front of high voltage equipment.

  • Choose from 2 sizes
  • Length: per linear metre (when ordering the no. of linear meters will correspond to the quantity ordered)
  • Width: 900mm or 1200mm
  • Thickness: 9.5mm
  • Colour: Black
  • Tested to 15,000 volts for 650 volt rated working

Unit of Measure: Each
Price: £36.54
Deckplate Anti-Static Mats - Black

SKU: CPP21002278

Deckplate anti-static mat with hardwearing diamond tread top surface, conductive buried layer and grounding stud. Ideal anti-static anti-fatigue mat for use in computing and electrical industries in electrostatic sensitive or protected areas..

  • Choose from 6 sizes
  • Width: 600mm, 900mm, or 1200mm
  • Length: 900mm 1500mm, 18,300mm, or linear metre (when ordering the no. of linear meters will correspond to the quantity ordered)
  • Thickness: 14mm
  • Colour: Black

Unit of Measure: Each
Price: £81.56
COBAswitch - BS EN:61111 - 3mm - Class 0

SKU: CPP21002306

COBAswitch mats made from EPDM rubber that conform to the most recent international safety standard - BS EN 61111:2009, with fine fluted ribbed pattern surface for slip resistance. Specifically designed switchboard matting for use in front of high voltage equipment.

  • Choose from 2 sizes
  • Length: 1000mm, or 2000mm
  • Width: 1000mm
  • Class 0 voltage rating
  • Thickness: 3mm
  • Colour: Black
  • Tested to 10,000 volts for 1000 volt working voltage

Unit of Measure: Each
Price: £57.92
COBAswitch - BS EN:61111 - 4mm - Class 2

SKU: CPP21002307

COBAswitch mats made from EPDM rubber that conform to the most recent international safety standard - BS EN 61111:2009, with fine fluted ribbed pattern surface for slip resistance. Specifically designed switchboard matting for use in front of high voltage equipment.

  • Choose from 2 sizes
  • Length: 1000mm, or 2000mm
  • Width: 1000mm
  • Class 2 voltage rating
  • Thickness: 4mm
  • Colour: Black
  • Tested to 30,000 volts for 17,000 volt working voltage

Unit of Measure: Each
Price: £72.81
COBAswitch - BS EN:61111 - 5mm - Class 4

SKU: CPP21002308

COBAswitch mats made from EPDM rubber that conform to the most recent international safety standard - BS EN 61111:2009, with fine fluted ribbed pattern surface for slip resistance. Specifically designed switchboard matting for use in front of high voltage equipment.

  • Choose from 2 sizes
  • Length: 1000mm, or 2000mm
  • Width: 1000mm
  • Class 4 voltage rating
  • Thickness: 5mm
  • Colour: Black
  • Tested to 50,000 volts for 36,000 volt working voltage

Unit of Measure: Each
Price: £91.68
Cobaswitch - Black - 6mm - 5m Rolls

SKU: CPP21002310

COBAswitch mats made of a natural rubber base polymer providing protection against electric shocks with ribbed pattern surface for slip resistance. Specifically designed switchboard matting for use in front of high voltage equipment.

  • Choose from 2 sizes
  • Length: 5000mm
  • Width: 900mm or 1200mm
  • Thickness: 6mm
  • Colour: Black
  • Tested to 11,000 volts for 450 volt rated working

Unit of Measure: Each
Price: £116.11
Cobaswitch - Black - 9.5mm - 5m Rolls

SKU: CPP21002311

COBAswitch mats made of a natural rubber base polymer providing protection against electric shocks with ribbed pattern surface for slip resistance. Specifically designed switchboard matting for use in front of high voltage equipment.

  • Choose from 2 sizes
  • Length: 5000mm
  • Width: 900mm or 1200mm
  • Thickness: 9.5mm
  • Colour: Black
  • Tested to 15,000 volts for 550 volt rated working

Unit of Measure: Each
Price: £182.73