Vertical Back Stops

Vertical Back Stops

SKU Vertical Back Stops
UOM Each

Provide protection against pallets dropping off the back of racking by attaching to beams at the rear and acting as a back stop.

Please contact us for pricing and delivery on this item


Dexion Vertical Back Stops fix to beams at the back of racking and prevent pallets from falling from the racking by acting as a barrier. While they are designed to take damage and not affect the main racking itself, it should be noted that they function as a visual aid and are not a pallet positioning device.
  • Suitable for use with racking in which the standard pallet overhang is 50mm front and back, the vertical bar is installed 50mm behind the rear side of the pallet
  • Does not permit load overhang on the pallet as it is positioned vertically
  • Length of frame spacer is 230mm for double entry racks
  • The pallet stop clamp that is used to attach the bar to the beams has two sets of drilled holes making it suitable for use with BX-beams with a depth of 40 or 50mm
  • If damage is incurred then the back stop should be replaced immediately

Delivery Information

Free UK Mainland Delivery is available on this item

Outlying Areas

A £5 Delivery Surcharge applies to postcodes: TR1-27 and some areas of rural wales.

A £15 Delivery Surcharge applies to postcodes: FK8, FK17-21, IV1-28, IV30-32, IV36, IV40, IV52-54, IV63, KW1-3, KW5-14, PA20-24, PA26-38, PA80, PH15-26, PH30-41, PH49-50.

Non UK Mainland

For delivery to non UK Mainland addresses please contact us on 0808 239 7985 for a quoted delivery price.

BT1-94, GY1-10, HS1-9, IM1-9, IV41-51, IV55-56, JE1-5, KA27-28, KW15-17, PA41-42, PA44-49, PA60-78, PH41-44, PO30-41, TR21-25, ZE1-3.

You Might Also Like

Pallet Gate

Pallet Gate


Pull Out Units