Coil or Drum Holder
Coil or Drum Holder
Provide support across the entire frame depth to allow the storage of smaller barrels, cable drums and coils of wire that could not otherwise be stored within racking.
Please contact us for pricing and delivery on this item
Details
Dexion Drum and Coil Holders can be fixed between pallet racking beams to provide secure support and storage capabilities across the entire frame depth of the racking for small barrels, cable drums and coils of wire that would otherwise drop through.
- Three sizes available (all fit frame depth of 1100mm):
- To suit load diameter of 320-500mm
- To suit load diameter of 500-1000mm
- To suit load diameter of 1000-1400mm
- Supporting beams must be designed to accept point loads
- Each support is 150mm longer than the corresponding frame depth and has an overhang of 75mm at both ends (this should be considered when designing aisle widths and selecting spacers)
- Finished in RAL 9002 grey
- Alternative dimensions available on request
Delivery Information
Free UK Mainland Delivery is available on this item
Outlying Areas
A £5 Delivery Surcharge applies to postcodes: TR1-27 and some areas of rural wales.
A £15 Delivery Surcharge applies to postcodes: FK8, FK17-21, IV1-28, IV30-32, IV36, IV40, IV52-54, IV63, KW1-3, KW5-14, PA20-24, PA26-38, PA80, PH15-26, PH30-41, PH49-50.
Non UK Mainland
For delivery to non UK Mainland addresses please contact us on 0808 239 7985 for a quoted delivery price.
BT1-94, GY1-10, HS1-9, IM1-9, IV41-51, IV55-56, JE1-5, KA27-28, KW15-17, PA41-42, PA44-49, PA60-78, PH41-44, PO30-41, TR21-25, ZE1-3.